Step 1: TOOL'S YOU'LL NEED
Ladder (or scaffold if required)
Nails or Screw
Measuring tape
Drop cloth
Drill
Pencil
Marley MCS Solvent Cement
Builders level
Hack saw (fine tooth PVC saw)
String line / Chalk line
Step 2:
Block spouting with cloth to create dry working area. Mark and cut 50mm inside bracket either side of damaged area.
Step 3:
Replace any damaged brackets. Place joiner and expansion joiner then measure distance in between for replacement piece.
Step 4:
Cut the required replacement section on ground and solvent cement the joiner and expansion joiner to each end.
Step 5:
Solvent cement replacement section into damaged area. Remove any excess Marley MCS® Solvent Cement.
